Amr Abdel Azeem Gouda
Drilling & Workover Supervisor | 8 Years Experience
Personal Data
·
Address: 20 Hassaan Salim St., El Tafteesh, El
Faiyum City, Egypt
·
Mobile No.: +20 10 912 40 433
·
Email: amr.goudah@gmail.com
·
Date of Birth: October 1, 1984
·
Passport No.: A10813741
·
Military Status: Exempted
·
Marital Status: Married
Career Objective
To work as a drilling &
workover supervisor at your company where my experience, education & skills
are expected to be exploited & further developed through a challenging work
environment to participate in achieving the goals of the drilling team.
Professional Profile
A drilling & workover supervisor
with reliable experience in designing & implementing drilling & workover
operations & with a good level of skills required to start a story of
success in your company.
Education
Faculty of Engineering, Cairo
University
·
B.S. in Petroleum Engineering
·
Graduation year: 2009
·
Cumulative Grade: Very Good
·
Graduation Project: A study on BED-1 field of
Bapetco, Western Desert, Egypt
·
Project Grade: Excellent
Professional Experience
Drilling & Workover
Supervisor
Petrosilah Petroleum Company
(Merlon International)
2011 - Present
·
Working as a drilling & workover rig supervisor
in the Western Desert of Egypt:
o
Implementing oil well drilling, completion
& workover operations as per designed programs & HSSE regulations with
the highest quality & lowest possible cost.
o
Drilling vertical & directional exploratory
& development deep oil wells.
o
Contributing to water injection projects by
drilling & completing water suppliers & injectors.
o
Implementing well re-entry & sidetracks.
o
Planning & implementing directional operations.
o
Using Landmark Compass software.
o
Exploiting virtual hydraulics software to
optimize drilling operations.
o
Being Familiar with drilling ERD wells.
o
Running & cementing different sizes of
casing strings & liners.
o
Planning, supervising & performing the
required calculations for casing & cement operations.
o
Monitoring well real-time parameters &
surveys & provide technical advice accordingly.
o
Running different types of drill bits (tri-cone
bits & PDC bits) & managing drilling & bit parameters to achieve
the best performance.
o
Dull grading drill bits & updating bit
records.
o
Monitoring the efficiency of drilling tools
such as motors, MWD tools, bits & jars & improving plans accordingly.
o
Drilling oil wells with different types of mud
(gel mud, KCl polymer mud & silicate mud).
o
Checking drilling & workover rigs according
to preset checklists prior to accepting rigs.
o
Implementing, witnessing & interpreting
open-hole & cased-hole logging operations.
o
Performing formation integrity tests &
leak-off test prior to drilling new formations.
o
Running different types of completion (natural
flow, ESP, SRP, water supply & water injection).
o
Supervising & following up a wide range of
completion & workover operations such as running & cementing liners,
cleaning out & scraping jobs, cement squeeze, remedial jobs, cement plugs,
DST, perforation, fishing operations, etc.
o
Planning & supervising different types of
perforation (casing gun, TCP & through-tubing perforation).
o
Following up perforating operations, loading
guns & guns depth correlation.
o
Running various types of packer, bridge plug,
cement retainer, nipple, SSD, tubing anchor& other downhole tools.
o
Milling & recovering packers.
o
Performing hydraulic fracturing & acid jobs
& witnessing coiled tubing, slick-line jobs, well bore cleaning & well
testing operations.
o
Installing various types of wellhead
configurations.
o
Being fully familiar with well control
principles, procedures & equipment.
o
Apply well control principles to safely conduct
drilling activities.
o
Controlling well kicks if occurs.
o
Take necessary precautions to avoid drilling
& workover problems.
o
Troubleshooting drilling problems (shale
problems, lost circulation, pipe sticking, etc.).
o
Providing immediate troubleshooting for any
problems occurring on the wellsite.
o
Set or suggest appropriate actions &
procedures to overcome & eliminate drilling & workover problems.
o
Adhering to & applying all HSSE regulations
& policies of the operating company.
o
Supporting the safety engineers in applying
company HSSE systems in the drilling site.
o
Observing all company health, safety &
environmental instructions, acting in a safe manner & avoiding unnecessary
risks.
o
Conducting safety drills such as fire drill,
kick drill, H2S drill on a regular & random basis.
o
Immediately reporting any unsafe conditions or
activities, dangerous occurrences or injuries in the workplace.
o
Providing comprehensive training for new
drilling engineers.
o
Assisting new employees in the use of relevant
work procedures & practices in order to ensure their safety & the
safety of all employees.
o
Managing, supervising & directing all
personnel working in the wellsite.
o
Setting appropriate plans & taking
necessary precautions for all jobs on the rig.
o
Holding pre-job safety meetings with rig &
service crews before every critical job.
o
Monitoring plans, programs & work progress.
o
Ensuring procedures employed meet acceptable
technical standards as well as project policy & procedures.
o
Ensuring compliance with all regulations
pertaining to the work & report any deviations.
o
Coordinating activities with third party
supervisory personnel on the drilling unit.
o
Planning ahead & setting time plans for
mobilizing service personnel & equipment.
o
Performing independent calculations to ensure
technical validity & correctness of contractors’ work.
o
Conducting performance assessments of work performed
by the drilling contractor & third party service contractors.
o
Preparing daily drilling & workover reports
& sending them to the concerned operations teams.
o
Completing (or ensuring completed) all routine
daily drilling & cost control reports & submitting them to the
operations office on a daily basis.
o
Upgrading drilling programs to adjust for
changes in the well bore pressure regime & geology.
o
Managing drilling & workover materials
movement from & to the warehouse & updating materials inventory.
o
Ensuring an adequate inventory of equipment &
materials is maintained on the drilling unit to carry out the work.
o
Ensuring equipment & materials meet quality
control standards & regulatory requirements.
Field Petroleum Engineer
Qarun Petroleum Company
(Apache Corporation)
2010 - 2011
·
Worked as a field petroleum engineer in Karama
base in the Western Desert of Egypt:
o
Followed up & supervised oil production
& water injection operations in Karama fields.
o
Managed & directed a team of production technicians
to detect wells surface & subsurface issues & carry out maintenance
actions.
o
Made work orders to projects & maintenance
departments to carry out required operations.
o
Calculated daily oil production & water
injection & submitted required reports.
o
Measured fluid level in the oil & source
water wells & sent results to reservoir department.
o
Adjusted & maintained water injection rates
as planned.
o
Discussed production problems with senior
petroleum engineers& suggested the appropriate actions to solve the
problems.
o
Set schedules for testing the producing wells
through test packages & witnessed the testing operations.
Professional Training &
Certificates
·
IWCF Well Control (Surface BOP
Stack) Level 4, Oil & Gas Skills (OGS), Jan 2015
·
H2S Safety Induction,
Petrosilah HSE department, Oct 2014
·
Landmark COMPASS Software,
Triple L Oil Services, Jan 2014
·
Directional & Horizontal
Drilling, Oil & Gas Skills (OGS), Jan 2014
·
IWCF Well Intervention, Oil
& Gas Skills (OGS), September 2013
·
IWCF Well Control (Combined
Surface & Subsea BOP Stack), Randy Smith Training Solutions, July 2012
·
Advanced Drill Bits
Methodology Training, Smith Bits, June 2011
·
Basic Drilling Technology,
Hegazy Industrial Services, October 2009
·
Soft Skills Program,
Information Technology Institute, April 2009
Field Training during Studying
·
Drilling Operations, Khalda Petroleum Company
(Al Salam Fields), August 2008
·
Offshore Production Operations, Suez Oil
Company (RasBudran Field), July 2008
·
Drilling Operations, Belayim Petroleum Company
(Abu Rudeis Fields), June 2008
·
Drilling Operations, Khalda Petroleum Company
(Al Salam Fields), September 2007
·
Drilling & Production Operations, Qarun
Petroleum Company (Qarun &karama Fields), June 2007
·
Gas Processing Operations, Khalda Petroleum
Company (Tarek Plant), August 2006
Skills
·
Personal skills:
o
Working under pressure with high efficiency.
o
Excellent leadership & decision making skills.
o
Excellent Communication skills.
o
Excellent Troubleshooting & problem solving
skills.
o
Excellent self-learning skills.
o
High attention to details.
o
High level of commitment to standards &
plans.
o
High level of managing time.
o
Good Team player.
·
Language Skills:
o
Very good at speaking English.
o
Very good at English technical writing.
o
Fluent in Arabic (mother tongue).
·
Computer Skills:
o
Excellent at using MS Windows & related
applications.
o
Excellent at using MS Office Word, Excel &
PowerPoint.
o
Excellent at using internet browsers, searching&
applications.
o
Excellent at learning new software easily &in
short time.
